MICROPROMPT INTERCONNECTIONS

microprompt-interimg21
3m-Battery lead.

microprompt-interimg22
Regulated AC-DC adaptor.

microprompt-interimg23
25M BNC to BNC cable.

microprompt interconnections
0.22m x 3-way splitter lead – Used for splitting the power for the MicroPrompt and camera or another device.

microprompt-interimg25
0.15m x 3-way Power and Video combiner lead at source end when used with the 10m-combined cable.

microprompt-interimg26
10m Combined Power and Video cable for supplying power and video to the MicroPrompt.

microprompt-interimg27
IEC mains lead.

microprompt-interimg28
1.9m Converter cable with (image reverse) switch. For connection with MicroPrompt display.

BATTERY LEAD x 3M
To extend power lead from Regulated AC-DC Adapter. To use with battery fitted with an X-CON 4-way connector.

REGULATED AC-DC ADAPTER
Basic power supply for MicroPrompt comprising cable mounted X-CON socket fitted to 12v 2.5 amp power supply.

BNC TO BNC VIDEO CABLE x 25M
To supply MicroPrompt with video signal from prompting source.

3-WAY CAMERA POWER SPLITTING LEAD x 0.22M
With 1 x 4-pin X-CON plug and 2 x 4-pin X-CON sockets. Required if MicroPrompt is to share camera battery power.

3-WAY COMBINING LEAD x 0.15M
This lead combines power (from 4-pin plug) and video (from BNC connector) into a 4-pin X-CON socket.

COMBINED POWER AND VIDEO LEAD x 10M
Used with 3-way combining lead, so that only one cable to MicroPrompt need be used. Up to three of these leads can be used. IEC POWER LEAD: To supply power to Regulated AC-DC adaptor.