TELEPROMPTER RIGGING FOR TRIPODS & PEDESTALS
We offer a variety of rigging solutions with both Fusion and the Premium / Quasar Ranges for Professional Cameras. Fusion uses 19mm bars and customised clamps
Premium / Quasar an ENG plate sandwiched between the camera plate / tripod and a U mount attached to the ENG plate via the large thumb screws to the monitor.
Rigging on Pedestals fitted with a suitable plate will use Portaprompt Telescopic Rods instead of the ENG plate and the U mount is attached to the rods via thumb screws. There are 2 lengths of rod to suit differing lens sizes.
These animations show the rigging process for lightweight and large pedestal type rigging for a tele-prompter or autocue.
Larger Pedestal Version
Another way of using a prompter is to actually not rig it on the camera support. This means a lightweight tripod is not a limiting factor to having a prompter. The other advantage is its very quick to separate the camera and prompter, for shots not needing the prompter. The draw back is the shot has to be a static piece to camera but that is almost the norm for prompted pieces to camera.
Prompter rigged on stand in front of camera